Liquid sodium silicate production equipment-dissolving material drum

● Equipment structure: This equipment consists of a cylinder and a head. The shell is provided with a feeding port.

● Using dissolving drum material, the transmission mode of drum adopts the combination of gear and belt drive. This kind of transmission mode has a certain buffer for the eccentricity generated by the operation of the equipment during the process of starting and stopping the equipment, ensuring stable operation and protecting the motor.

● The inlet and outlet are made of PTFE rotary joint, which ensures good air tightness, and can be adjusted in time according to the wear of PTFE ring.

● In order to reduce the change caused by the heating and load-bearing of the drum during operation, reinforcing ribs are added at the inner and outer ends of the drum head, which are integrated with the drive shaft and the hollow shaft, and are placed on the bearing seat; the bearings are self-aligning bearings, and the imported pipe section is partially The sliding method is adopted to avoid the deformation caused by expansion and contraction caused by thermal expansion and cold contraction to a certain extent.

● In order to reduce the cavitation on the pipe wall caused by the incoming steam, the inlet angle is adjusted reasonably according to the experience of use, and the cavitation is avoided to the greatest extent.

● Equipment foundation: The basic prefabrication can be carried out according to the basic drawing provided by the manufacturer, or the basic prefabrication can be carried out according to the user's site and process operation conditions. During the basic prefabrication, enough space for equipment operation, operation, maintenance and safety guardrail installation should be reserved.

● Keep warm

Except for the transmission and rotary sealing parts of the equipment, an insulation layer should be added, and the insulation layer should be taken care of by the user.

Technical characteristics table